LTC1345CSW single power supply V.35 transceiver The new original is produced by LINEAR original factory, using SOP-28 package, batch number 05+, and the microchip century-old integrated circuit warehouse is currently in stock
peculiarity
- 单芯片可提供所有 V.35 差分时钟和数据信号
- 单 5V 工作电源运作
- 软件可选的数据终端设备 (DTE) 或数据通讯设备 (DCE) 配置
- 发送器和接收器可承受重复的 ± 10kV ESD 脉冲
- 关断方式将 ICC 降至 1µA (典型值)
- 10M 波特传送速率
- 当禁止、停机或断电时，发送器保持高阻抗
- 符合 CCITT V.35 规格
- 发送器设有短路保护措施
description
The LTC®1345 is a monolithic transceiver that uses a single 5V supply to provide differential clock and data signals to the V.35 interface. Paired with an external resistor termination network and an LT®1134A RS232 transceiver that controls the signal, LTC1345 forms a complete low-power DTE or DCE V.35 interface port with a single 5V operating supply.
LTC1345 has three current output differential transmitters, three differential receivers, and a charge pump. The transceiver can be configured for DTE or DCE operation, or shut down with two selector pins. In shutdown mode, the supply current is reduced to 1μA.
The transceiver can operate up to 10M baud. All transmitters are short-circuit protected, and a receiver output enable pin allows the receiver output to be forced into a high-impedance state. Both the transmitter output and receiver input are ±10kV ESD protected. The charge pump stabilizes one VEE output by employing three external 1μF capacitors.