• Product Introduction

LTC2615

LTC2615 - An eight-channel, I2C, 16-bit rail-to-rail DAC in a 14-pin SSOP package

peculiarity

• 外形尺寸最小的引脚兼容型 8 通道 DAC：
      LTC2605：16 位
      LTC2615：14 位
      LTC2625：12 位
• 在整个温度范围内保证单调
• 400kHz I²C 接口
• 2.7V 至 5.5V 宽电源范围
• 低功率操作：每个 DAC 的电源电流为 250µA (在 3V)
• 个别通道断电至 1µA (最大值)
• DAC 之间的超低串扰 (
• 高轨至轨输出驱动 (±15mA，最小值)
• 双缓冲数字输入
• 27 个可选地址
• LTC2605/LTC2615/LTC2625：上电复位至零标度
• LTC2605-1/LTC2615-1/LTC2625-1：上电复位至中间标度
• 纤巧型 16 引脚窄体 SSOP 封装

description

The LTC®2605/LTC2615/LTC2625 is an 8-channel 16, 14, and 12-bit, 2.7V to 5.5V rail-to-rail voltage output DAC in a 16-pin narrow-body SSOP package. They have built-in high-performance output buffers and guarantee monotony. These devices set new board density benchmarks for 16- and 14-bit DACs and raise the bar for output driver, crosstalk, and load regulation performance in single-supply, multi-voltage output applications. These devices use a two-wire I2C-compatible serial interface. LTC2605/LTC2615/LTC2625 operates in standard mode (maximum clock rate of 100kHz) and fast mode (maximum clock rate of 400kHz). LTC2605/LTC2615/LTC2625 has a built-in power-on reset circuit. During power-up, the voltage output rises to less than 10mV above the zero scale; After powering up, they remain at zero scale until a valid write and update operation appears. The power-on reset circuit resets LTC2605-1/LTC2615-1/LTC2625-1 to the intermediate scale. The voltage output remains on the intermediate scale until a valid write and update operation occurs.

apply

• 移动通信
• 过程控制和工业自动化
• 仪表
• 自动测试设备