home page>Product Center> singlechip microcontroller
HCS201-I/P
Product images are for illustrative purposes only
Product details are welcome upon request

HCS201-I/P

  • Category:Singlechip microcomputer
  • Product Name:Rolling encryption chip
  • Manufacturers:MICROCHIP
  • Production Batch Number:12+
  • Encapsulation:DIP
  • Stock Status:There is stock
  • Stock Quantity:230
  • Minimum order quantity: 1
  • Details:Click here to find a pdf of HCS201-I/P
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

HCS201-I/P rolling encryption chip

andHCS201-I/PRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
XC6223H281MR TOREX 10+ SOT23-5 Original in stock
MCP6032T-E/SN Microchip 12+ SMD/SMT Operational amplifiers
MCP6032T-E/MS Microchip 12+ SMD/SMT Operational amplifiers
MCP6032-E/SN Microchip 12+ SMD/SMT Operational amplifiers
MCP6032-E/MS Microchip 12+ SMD/SMT Operational amplifiers
B0505S-2W MORNSUN 10+11+ SIP-4 Original in stock
MCP6031DM-PTPLS Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/SN Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/OT Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/MS Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be

Popular searches


Model Manufacturers lot number encapsulation illustrate
DZ52-080Z300R024/OH Hartmann-Lammle 23+ module Hartmann-Lammle DZ52-080Z300R024/OH
1SVR040011R2500 ABB 2023+ converter Universal signal converter 110-240VAC 50/60Hz / 100-300VDC
EA12-NO-20-1-31-BD ROSS ENGINEERING 23+ Relays EA12-NO-20-1-31-BD High Voltage Relay
EA12-DT-20-1-31-BD ROSS ENGINEERING 2023+ module High voltage relays
ABCIRHSE06HC2214PCWF80 AB 2023 connector Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN Alliance Memory Inc 23+ SOJ-36 AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE ASAHI KEIKI 2023+ weld Temperature sensor
V23154D735B110 TE 2023+ Relays Low Signal Relay - PCB V23154D 735B110
V23154D735F104 TE 23+ Relays Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20 SCHMERSAL 2023+ switch Safety gate switch
PW70d(2x10432Ω/83°） FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR Honeywell 10+11+ SMD RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors

MICROCHIP BRAND PRODUCT RECOMMENDATION


Model Manufacturers lot number encapsulation illustrate
MCP6031DM-PTPLS Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/SN Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/OT Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/MS Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031T-E/MC Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031-E/SN Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031-E/MS Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6031-E/MC Microchip 12+ SMD/SMT The MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA offset voltage, which is less than 150 microvolts. The MCP6031 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. The MCP6031 can have a single supply voltage as low as 1.8V and a quiescent current of less than 1 microamp. be
MCP6444T-E/ST Microchip 12+ SMD/SMT The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444T-E/SL Microchip 12+ SMD/SMT The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444-E/ST Microchip 12+ SMD/SMT The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444-E/SL Microchip 12+ SMD/SMT The MCP6444 device is a four-nanopower op amp (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6442T-E/MNY Microchip 12+ SMD/SMT The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442T-E/SN Microchip 12+ SMD/SMT The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442T-E/MS Microchip 12+ SMD/SMT The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442-E/SN Microchip 12+ SMD/SMT The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442-E/MS Microchip 12+ SMD/SMT The MCP6442 device features a dual nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6441T-E/OT Microchip 12+ SMD/SMT The MCP6441 device is a single nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-based applications
MCP6441T-E/LT Microchip 12+ SMD/SMT The MCP6441 device is a single nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is unity-gain stable with a gain bandwidth product of 9 kHz (typical). These devices operate from a single supply as low as 1.4V. These features make home op amps ideal for single-supply, battery-based applications
MCP6561 MICROCHIP 11+ SOT23-5 Comparator with 1.8V low power push-pull output

Categorical search

Copyright chip100.com © 2010-2011 MCCT粤ICP备14056028号

Related Links

wirewound resistor rectangular connector contacts crimping pliers term block hdr insulated terminals bus plug needle pusher cement resistance circular connectors ph connector