AD5694R
nanoDAC+
TMIt is a quad, 12-bit, rail-to-rail, voltage output DAC. The device contains a 2.5V, 2ppm/°C internal reference (on by default) and a gain select pin that provides a full-scale output of 2.5V (gain = 1) or 5V (gain = 2).
Operating from a single 2.7 V to 5.5 V supply, monotonicity is guaranteed by design, with less than 0.1% FSR gain error and 1.5 mV offset error. Available in 3mm x 3mm LFCSP and TSSOP packages.
The AD5694R also contains a power-on reset circuit and an RSTSEL pin that ensures that the DAC output powers up to zero scale or midscale until a valid write is performed. With independent power-down for each channel, the device's power consumption drops to 4 uA at 3 V in power-down mode.
The AD5694R is available in I2The C interface clocks up to 400 kHz and includes a VLOGIC pin ready for 1.8V/3V/5V logic levels.
Product Focus
- High relative accuracy:AD5694R(12 bits): ±1LSB INL (max)
- Low drift on-chip reference:Temperature drift: 2ppm/°C at 2.5V
- Small package:3mm × 3mm 16-pin LFCSP or 16-pin TSSOP
apply
- Optical transceivers
- Base station power amplifier
- Process control (PLC I/O card)
- Industrial automation
- Data acquisition system