AD5695R
nanoDAC+
TM是一款四通道、14位、轨到轨、电压输出DAC。该器件内置2.5 V、2 ppm/˚C内部基准电压源（默认使能）和增益选择引脚，满量程输出为2.5 V（增益=1）或5 V（增益=2）。
It operates from a single 2.7 V to 5.5 V supply and is designed to be monotonious, with a gain error of less than 0.1% FSR and an offset error of 1.5 mV. The devices are available in 3 mm x 3 mm LFCSP and TSSOP packages.
AD5695R also has a built-in power-on reset circuit and an RSTSEL pin that ensures that the DAC output is powered on to zero or intermediate level and maintains that level until a valid write operation is performed. In addition, all devices have independent power-saving characteristics for each channel, and in power-saving mode, the power consumption of the device is reduced to 4 uA at 3 V.
AD5695R features an I2C interface with an operating clock rate of up to 400 kHz and built-in VLOGIC pins for 1.8 V/3 V/5 V logic.
Product Focus
- High relative accuracy: AD5695R (14 bits): ±1LSB INL (max)
- Low-drift in-chip reference source: 2.5 V with 2 ppm/°C temperature drift
- Small Package: 3mm × 3mm 16-pin LFCSP or 16-pin TSSOP
apply
- Optical transceiver
- Base station power amplifiers
- Process control (PLC I/O card)
- Industrial automation
- Data acquisition systems