ADG5204BRUZ-RL7

The ADG5204 is a complementary metal-oxide semiconductor (CMOS)Analog multiplexer, built-in 4 single channels.

The ultra-low capacitance and charge injection characteristics of these switches make them an ideal solution for data acquisition and sample-and-hold applications that require low glitches and fast settling times. The high switching speed and high signal bandwidth make the ADG5204 suitable for video signal switching applications.

The ADG5204 is designed using a channel process with anti-latch-up capability. The dielectric channel separates the P-channel from the N-channel transistor, ensuring that latch-up does not occur even under severe overvoltage conditions. The ADG5204 switches one of the four inputs to a common output D based on the addresses identified by the 3-bit binary address lines A0, A1, and EN. When the EN pin is logic 0, the device is disabled. When turned on, the switches conduct the same in both directions, and the input signal range extends to the supply voltage range. Under the disconnection condition, the signal level equal to the supply voltage is blocked. All switches are open-before-close type.

apply

• Automatic test equipment
• Data acquisition
• Instrumentation
• Avionics
• Audio and video switches
• Communication systems

Product Focus

1. Channel isolation prevents latch-up. 
   The dielectric channel connects the P channel with the N channeltransistorSeparate to ensure that latch-up does not occur even under severe overvoltage conditions.
2. Ultra-low capacitance with charge injection of less than 1 pC.


3. Dual-supply operation.
   For bipolar analog applications, the ADG5204 can operate from dual supplies up to ±22 V.
4. Single-supply operation.
   For unipolar analog applications, the ADG5204 can operate from a single-rail supply up to 40 V.
5. 3 V logic compatible with digital inputs.


6. V_INH = 2.0 V，V_INL = 0.8 V。


7. No V required_LLogical power supply.