|
International standard non-certified type |
class |
classify |
Contact composition |
Model |
Coil voltage rating |
Minimum packing unit |
Monostable |
Standard type |
2c |
G6AU-274P |
DC3、4.5、5、6、9、12、24 |
25pcs/rod |
DC48 |
Low sensitivity type |
2c |
G6A-274P-40 |
DC3、4.5、5、6、9、12、24V |
DC48 |
High sensitivity type |
2c |
G6A-274P-15 |
DC5、12、24 |
DC48 |
Low heat power type |
2c |
G6A-274P-LT |
DC3、4.5、5、12、24 |
—— |
1. Winding blocking type |
Standard type |
2c |
G6AU-474P |
DC5、12、24 |
DC48 |
2. Winding blocking type |
Standard type |
2c |
G6AK-274P |
DC3、4.5、5、6、9、12、24 |
DC48 |
Low sensitivity type |
2c |
G6AK-274P-40 |
DC5、12、24 |
—— |
|
Concentrate. When ordering, please indicate the coil rated voltage (V). Example: G6A-274P DC3 In addition, the packaging mark and the voltage specification marked at the time of delivery are □□VDC. |
|
· UL/CSA standard certified type |
class |
classify |
Contact composition |
Model |
Coil voltage rating |
Minimum packing unit |
Monostable |
Standard type |
2c |
G6A-274P-ST-US |
DC3、4.5、5、6、9、12、24 |
25pcs/rod |
DC48 |
Low sensitivity type |
2c |
G6A-274P-ST40-US |
DC3、5、6、9、12、24 |
DC48 |
High sensitivity type |
2c |
G6A-274P-ST15-US |
DC3、5、6、9、12、24 |
DC48 |
1. Winding blocking type |
Standard type |
2c |
G6A-274P-ST-US |
DC3、4.5、5、6、9、12、24 |
DC48 |
2. Winding blocking type |
Standard type |
2c |
G6AK-274P-ST-US |
DC3、4.5、5、6、9、12、24 |
DC48 |
Low sensitivity type |
2c |
G6AK-274P-ST40-US |
DC3、5、6、9、12、24 |
DC48 |
|
Concentrate. When ordering, please indicate the coil rated voltage (V). Example: G6A-274P-ST-US DC3 In addition, the packaging mark and the voltage specification marked at the time of delivery are □□VDC. |
Operating coil / monostable type (standard type) |
project |
Rated current (mA) |
Coil resistance (Ω) |
Coil inductance (H) |
Operating voltage (V) |
Reset voltage (V) |
Maximum allowable voltage (V) |
Power consumption (mW) |
Contact composition |
Rated voltage(V) |
When reset |
When moving |
2c |
DC |
3 |
66.7 |
45 |
0.07 |
0.065 |
70% or less |
10% or more |
200% (at23℃ ) |
About 200 |
4.5 |
44.6 |
101 |
0.16 |
0.14 |
5 |
40.0 |
125 |
0.2 |
0.18 |
6 |
33.3 |
180 |
0.29 |
0.26 |
9 |
22.2 |
405 |
0.63 |
0.57 |
12 |
16.7 |
720 |
1.1 |
1.06 |
24 |
8.3 |
2,880 |
4.5 |
4.1 |
48 |
4.9 |
9,750 |
13.7 |
12.5 |
About 235 |
|
|
concentrate
|
1.The rated current and coil resistance are the values at the coil temperature +23°C, and the tolerance is ±10%.
|
|
2.The operating characteristics are the value at +23°C coil temperature.
|
|
3.The maximum allowable voltage is RelaysThe maximum value of the voltage that the coil can apply.
|
|
|
Operating coil / monostable type (low sensitivity type) |
project |
Rated current (mA) |
Coil resistance (Ω) |
Coil inductance (H) |
Operating voltage (V) |
Reset voltage (V) |
Maximum allowable voltage (V) |
Power consumption (mW) |
Contact composition |
Rated voltage(V) |
When reset |
When moving |
2c |
DC |
3 |
133.3 |
22.5 |
0.03 |
0.02 |
70% or less |
10% or more |
150% (at23℃) |
About 400 |
5 |
80 |
62.5 |
0.08 |
0.07 |
6 |
66.7 |
90 |
0.11 |
0.1 |
9 |
44.3 |
203 |
0.27 |
0.23 |
12 |
33.3 |
360 |
0.52 |
0.43 |
24 |
16.7 |
1,440 |
2.1 |
1.8 |
48 |
8.3 |
5,760 |
7.5 |
6.4 |
|
|
concentrate
|
1.The rated current and coil resistance are the values at the coil temperature +23°C, and the tolerance is ±10%.
|
|
2.The operating characteristics are the value at +23°C coil temperature.
|
|
3.The maximum allowable voltage is the maximum voltage that can be applied by the relay coil.
|
|
|
Operating coil / Monostable type (high sensitivity type 150mW) / (Low heat starter type) |
project |
Rated current (mA) |
Coil resistance (Ω) |
Operating voltage (V) |
Reset voltage (V) |
Maximum allowable voltage (V) |
Power consumption (mW) |
Contact composition |
Rated voltage(V) |
2c |
DC |
3 |
50 |
60 |
80% or less |
10% or more |
200% (at23℃) |
About 150 |
4.5 |
33.3 |
135 |
5 |
30 |
167 |
6 |
25 |
240 |
9 |
16.7 |
540 |
12 |
12.5 |
960 |
24 |
6.3 |
3,840 |
48 |
3.2 |
15,000 |
|
|
concentrate
|
1.The rated current and coil resistance are the values at the coil temperature +23°C, and the tolerance is ±10%.
|
|
2.The operating characteristics are the value at +23°C coil temperature.
|
|
3.The maximum allowable voltage is the maximum voltage that can be applied by the relay coil.
|
|
|
Operating coil / 1 winding latching type |
project |
Rated current (mA) |
Coil resistance (Ω) |
Coil inductance (H) |
Operating voltage (V) |
Reset voltage (V) |
Maximum allowable voltage (V) |
Power consumption (mW) |
Contact composition |
Rated voltage(V) |
When reset |
When moving |
2c |
DC |
3 |
33.7 |
89 |
0.15 |
0.11 |
70% or less |
70% or less |
200% (at23℃) |
About 100 |
5 |
20 |
250 |
0.44 |
0.35 |
6 |
16.7 |
360 |
0.64 |
0.48 |
9 |
11.1 |
810 |
1.38 |
1.07 |
12 |
8.3 |
1,440 |
2.5 |
2 |
24 |
4.2 |
5,760 |
9.2 |
7.2 |
48 |
2.5 |
19,000 |
28.5 |
22 |
About 120 |
|
|
concentrate
|
1.The rated current and coil resistance are the values at the coil temperature +23°C, and the tolerance is ±10%.
|
|
2.The operating characteristics are the value at +23°C coil temperature.
|
|
3.The maximum allowable voltage is the maximum voltage that can be applied by the relay coil.
|
|
|
Operating coil / 2-winding latching type (standard type) |
project |
Rated current (mA) |
Coil resistance (Ω) |
Coil inductance (H) |
Operating voltage (V) |
Reset voltage (V) |
Maximum allowable voltage (V) |
Power consumption (mW) |
Set the coil |
Reset the coil |
Contact composition |
Rated voltage(V) |
When reset |
When moving |
When reset |
When moving |
2c |
DC |
3 |
66.7 |
45 |
0.037 |
0.027 |
0.027 |
0.037 |
70% or less |
70% or less |
200% (at23℃ ) |
About 200 |
4.5 |
40.2 |
112 |
0.09 |
0.065 |
0.065 |
0.09 |
About 180 |
5 |
36 |
139 |
0.11 |
0.08 |
0.08 |
0.11 |
6 |
30 |
200 |
0.16 |
0.12 |
0.12 |
0.16 |
9 |
20 |
450 |
0.38 |
0.28 |
0.28 |
0.38 |
12 |
15 |
800 |
0.6 |
0.45 |
0.45 |
0.6 |
24 |
7.5 |
3,200 |
2.1 |
1.5 |
1.5 |
2.1 |
48 |
4.2 |
11,520 |
8.5 |
6.3 |
6.3 |
8.5 |
About 200 |
|
|
concentrate
|
1.The rated current and coil resistance are the values at the coil temperature +23°C, and the tolerance is ±10%.
|
|
2.The operating characteristics are the value at +23°C coil temperature.
|
|
3.The maximum allowable voltage is the maximum voltage that can be applied by the relay coil.
|
|
|
Operating coil / 2-winding latching type (low sensitivity type) |
project |
Rated current (mA) |
Coil resistance (Ω) |
Coil inductance (H) |
Operating voltage (V) |
Reset voltage (V) |
Maximum allowable voltage (V) |
Power consumption (mW) |
|
|
Set the coil |
Reset the coil |
Contact composition |
Rated voltage(V) |
When reset |
When moving |
When reset |
When moving |
2c |
DC |
3 |
120 |
25 |
0.015 |
0.01 |
0.01 |
0.015 |
70% or less |
70% or less |
150% (at23℃ ) |
About 360 |
4.5 |
79.9 |
56.3 |
0.04 |
0.025 |
0.025 |
0.04 |
5 |
72.5 |
69 |
0.05 |
0.035 |
0.035 |
0.05 |
6 |
60 |
100 |
0.07 |
0.05 |
0.05 |
0.07 |
9 |
40 |
225 |
0.16 |
0.12 |
0.12 |
0.16 |
12 |
30 |
400 |
0.28 |
0.2 |
0.2 |
0.28 |
24 |
15 |
1,600 |
1.1 |
0.75 |
0.75 |
1.1 |
48 |
7.5 |
6,400 |
4 |
2.9 |
2.9 |
4 |
|
|
concentrate
|
1.The rated current and coil resistance are the values at the coil temperature +23°C, and the tolerance is ±10%.
|
|
2.The operating characteristics are the value at +23°C coil temperature.
|
|
3.The maximum allowable voltage is the maximum voltage that can be applied by the relay coil.
|
|
|
·switchDepartment (Contact Department) |
load project
|
Resistive load |
Inductive load (cosφ=0.4、L/R=7ms) |
Contact contact mechanism |
Double crossbar contacts |
Contact material |
Ag+Au alloy |
Rated load |
AC125V 0.5A DC30V 2A |
AC125V 0.3A DC30V 1A |
Rated power-on current |
3A |
The maximum value of the contact voltage |
AC250V、DC220V |
The maximum value of the contact current |
2A |
1A |
|
|
Monostable |
1. Winding blocking type |
2. Winding blocking type |
Contact resistance*1 |
50mΩ or less |
Action/settling time*2 |
5ms or less (about 3ms) |
5ms or less (about 2.5ms) |
Reset/reset time*2 |
3ms or less (approx. 1.2ms) |
5ms or less (about 2.5ms) |
Minimum set, reset pulse amplitude |
― |
More than 10ms |
Insulation resistance*3 |
1,000MΩ or more (DC500V megohmmeter) (except for setting and resetting coils) |
Withstand pressure |
Between coil contacts |
AC1,000V 50/60Hz 1min |
Between the same pole contact |
AC1,000V 50/60Hz 1min |
Between heteropolar junctions |
AC1,000V50/60Hz 1min |
Set and reset between coils |
― |
AC100V 50/60Hz 1min |
Resistant to impulse voltage |
1,500V 10x160(μs)(FCC part68) |
vibration |
durable |
10~55~10Hz Single amplitude 2.5mm (double amplitude 5mm) |
Misoperation |
10~55~10Hz Single amplitude 1.65mm (double amplitude 3.3mm) |
impact |
durable |
1,000m/s2
|
Misoperation |
500m/s2
|
300m/s2
|
life span |
machine |
More than 100 million times (switching frequency 36,000 times/h) |
electric |
More than 500,000 times (rated load switching frequency 1,800 times/h) |
Failure rate P level (reference value*6) |
DC10mV 10μA |
Use ambient temperature |
-40~+70°C (no icing, no condensation) |
Use ambient humidity |
5~85%RH |
weight |
Approx. 3.5g |
|
|
Concentrate.
|
The left value is the initial value |
*1. |
Measurement conditions: according to the voltage drop method, under the condition of DC1V 10mA. |
*2. |
The value in ( ) is the actual value. |
*3. |
Measurement conditions: measured with DC500V megohmmeter, the position is the same as when measuring withstand voltage (except for setting and resetting the coil). |
*4. |
This value is the value at the switching frequency of 60 times/min, and the fault judgment value of the contact resistance is 50Ω. |
|
This value may vary depending on the switching frequency and usage environment, so please check the actual usage conditions before using it. |
Concentrate.
|
Pay attention to the coil polarity
|
Represented as a product orientation indicator.
|
Monostable G6A-274P
Note. The general dimensional tolerance is ±0.3mm.
|
|
|
Printing substrate processing size
(BOTTOM VIEW) Dimensional tolerance± 0.1mm.
|
Terminal configuration/internal connection diagram
(BOTTOM VIEW)
|
|
|
1. Winding blocking type G6AU-274P
Note. The general dimensional tolerance is ±0.3mm.
|
Printing substrate processing size
(BOTTOM VIEW) Dimensional tolerance± 0.1mm.
|
Terminal configuration/internal connection diagram
(BOTTOM VIEW)
|
|
2. Winding blocking type G6AK-274P
Note. The general dimensional tolerance is ±0.3mm.
|
Printing substrate processing size
(BOTTOM VIEW) Dimensional tolerance± 0.1mm.
|
Terminal configuration/internal connection diagram
(BOTTOM VIEW)
|
|
|
|
|
|