peculiarity
(typical, unless otherwise noted)
The LMC6035 is available in a micro SMD package
Guaranteed 2.7V, 3V, 5V and 15V performance
Specify 2 K and 600 loads
Wide operating voltage range: 2.0V to 15.5V
Ultra-low input current: 20fA
Rail-to-rail output swings @ 600: 200mV, either at 2.7V @ 100K railway No matter from rail to 5mV at 2.7V
High voltage gain: 126 dB
Wide input common-mode voltage range from 0.1V to V S = 2.7V 2.3V
Low distortion at 10kHz: 0.01%
Dual LMC6035 LMC6036 four
AN - 1112 micro SMD consideration
illustrate
The LMC6035/6 is an economical, low voltage op amp with a rail-to-rail output swing of 600 load capacity. LMC6035 is a micro SMD packaging technology used in a chip size package (8 solder ball micro SMD). Both allow single-supply operation and are guaranteed to 2.7V, 3V, 5V, and 15V supply voltages. The 2.7 supply voltage corresponds to the end life of 3 NiCd or NiMH batteries in series, making the LMC6035/6, voltage (0.9V/cell) ideal for portable and charging systems. It also has a reduced supply voltage that operates below the guaranteed 2.7V and performs well in its specifications. This is well below 2.7V and is sufficient for operation to provide a "comfort zone." Its ultra-low input current (I) makes it ideal for low-power active filter applications as it allows the use of higher resistance values and lower capacitance values. In addition, the drive capability of the LMC6035/6 enables a wide range of applications for these op amps for low voltage systems.
apply
filter
High impedance buffers or preamplifiers
Battery-powered electronics
Medical devices