AD5689R
nanoDAC+ ™ is a dual, 16-bit, rail-to-rail voltage output DAC. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and gain select pin, and a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). It operates from a single 2.7 V to 5.5 V supply, is designed to be monotonic, and has gain error of less than 0.1% FSR and offset error performance of 1.5 mV. The device is available in 3 mm × 3 mm LFCSP and TSSOP packages.
The AD5689R also contains a power-on reset circuit and an RSTSEL pin that ensures that the DAC output powers up to zero scale or midscale until a valid write is performed. In addition, all devices feature independent power-down for each channel, reducing the device's power consumption to 4 μA at 3 V in power-down mode.
The AD5689R uses a versatile SPI interface with clock rates up to 50 MHz and includes a V ready for 1.8 V/3 V/5 V logic supplies
منطقPins.
Product features
- High relative accuracy:
AD5689R(16 bits): The integral nonlinearity (INL) maximum is ±2 LSB
- Low drift on-chip reference:
Temperature drift: 2 ppm/°C at 2.5 V
- Small package:
3 mm × 3 mm, 16-pin LFCSP, or 16-pin TSSOP
apply
- Optical transceivers
- Base station power amplifier
- Process control (PLC I/O card)
- Industrial automation
- Data acquisition system