ACS722LLCTR-20AU-T

• Product Introduction

The Allegro™ ACS722 current sensor IC is an affordable and accurate solution for AC or DC current sensing in industrial, commercial, and communications systems. Small packages are ideal for space-constrained applications while reducing cost with a smaller board footprint. Typical applications include motor control, load detection and management, switching power supplies, and overcurrent fault protection.

The device consists of a low-bias precision linear Hall sensor circuit with a copper current path close to the surface of the wafer. The current applied through this copper current circuit generates a magnetic field that can be sensed by the integrated Hall IC and converted into a proportional voltage. By bringing the magnetic field closer to the Hall sensor, the device accuracy is optimized. Accurate proportional voltage is provided by a stable chopper-type low-bias BiCMOS Hall IC that includes Allegro's patented digital temperature compensation for extremely accurate temperature performance. As more current flows through the copper main current flow path (from pins 1 and 2 to pins 3 and 4), the output of the device is positively slope. The path described above is the path used by current sensing. The internal resistance of this conduction path is typically 0.65 mΩ and the power consumption is low.

The terminal end of the current flow path is electrically insulated from the sensor pins (pins 5 through 8). This allows the ACS722 current sensor IC to be used in high-side current sensing applications that do not use high-side differential amplifiers or other high-cost insulation technologies.

The ACS722 is available in a small, low-profile surface-mount SOIC8 package. The pin frame is 100% matte tin plated and is compatible with standard lead-free printed circuit board assembly processes. The device does not contain lead inside, with the exception of high-temperature leaded solder balls for flip chips that are currently exempt from the Restriction of Use of Certain Hazardous Substances Directive (RoHS). The device is fully calibrated prior to shipment.

• • 获得专利的集成数字温度补偿电路考虑到开合环路传感器内近闭合环路温度测量的精确度
  • UL60950-1 (ed. 2) 获得认证
    
    • 介电强度电压 = 2.4 kVrms
    • 基本绝缘工作电压 = 420 Vpk/297 Vrms
  • 行业领先的噪声性能，通过专有放大器和滤波器设计工艺极大地改进带宽
  • 引脚可选择的带宽：80 kHz 适用于高带宽应用，或 20 kHz 适用于低噪声性能。
  • 0.65 mΩ 低功耗和高涌流耐受能力的主要导体电阻
  • 小尺寸纤薄 SOIC8 封装适合空间有限的应用
  • 集成屏基本消除了电流导体到晶片的电容耦合，极大地抑制了高 dv/dt 瞬变导致的输出噪声
  • 3 到 3.6 V，单电源供电输出电压与 AC 或 DC 电流相称
  • 工厂校准灵敏度和静态输出电压用于改进精确度
  • 稳定斩波器带来极为稳定的静态输出电压
  • 近零的磁滞
  • 电源电压的比率计输出

//www.chip100.com/