LM2670SD-12

• Efficiency up to 94%
• Easy-to-use design (with off-the-shelf external components)
• 150mΩ DMOS output switch
• Fixed output and adjustable (1.2V to 37V) versions of 3.3V, 5V and 12V
• When the standby current of 50μA is disconnected,
• The entire line exceeds up to ± 2% output tolerance and load conditions
• Wide input voltage range from 8V to 40V:
• External synchronized clock function (280KHz to 400kHz)
• 260 kHz fixed frequency internal oscillator
• Operating junction temperature range from -40 to +125 °C

illustrate

The LM2670 series regulators are monolithic integrated circuits that are step-down (buck-buck) switching regulators capable of driving loads up to 3A with excellent line and load regulation characteristics. High efficiency (> 90%) is obtained by using a low-on-resistance DMOS power switch. The series includes fixed output voltages of 3.3V, 5V and 12V and adjustable output versions.

The concept of the SIMPLE SWITCHER provides a complete design with the use of a minimum number of external components. Clock switching frequencies are available with an internal fixed frequency oscillator (260KHz) or externally supplied clocks in the range of 280KHz to 400kHz, allowing for smaller size components. A standard inductor used in the LM2670 series is available from several manufacturers, greatly simplifying the design process. External synchronous clocks provide direct and precise control of output ripple frequencies for consistent filtering or spectral positioning.

The LM2670 series also features built-in thermal shutdown, current limiting, and an ON/OFF control input that can adjust up and down a standby state with a low quiescent current of 50μA. The output voltage is guaranteed to be a tolerance of ± 2%.

apply

• Simple design, high efficiency (> 90%), step-down switching regulator
• Efficient system pre-regulator linear regulator
• Battery charger
• Radio equipment that communicates and synchronizes clock frequencies, voltage regulators