home page>Product Center> switch

Product images are for illustrative purposes only
Product details are welcome upon request

ADG904BCPZ

Category:switch
Product Name:Wideband 2.5 GHz, 37 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, 4:1 multiplexer/SP4T
Manufacturers:ADI
Production Batch Number:15+
Encapsulation:20 ld LFCSP
Stock Status:There is stock
Stock Quantity:2500
Minimum order quantity: 1
Details:

Product introduction

Advantages and features

Wideband switching with –3 dB bandwidth of 2.5 GHz
ADG904: Absorbent 4:1 multiplexer/SP4T
ADG904-R: Reflective 4:1 Multiplexer/SP4T
High off-isolation: 37 dB at 1 GHz

Low insertion loss: 1.1 dB (dc to 1 GHz)
Operates from a single 1.65 V to 2.75 V supply
CMOS/LVTTL control logic
20-pin TSSOP and 4 mm × 4 mm LFCSP packages
Low power consumption (1 μA max.)

Product Classification

Switch andMultiplexer

Analog switches withMultiplexer

Product details

Both the ADG904 and ADG904-R are wideband analog 4:1 multiplexers fabricated on CMOS processes with high isolation and low insertion loss up to 1 GHz. The ADG904 is an absorption/matched multiplexer with 50 Ω terminated shunt pins; The ADG904-R is a reflective multiplexer. These devices are designed for high isolation from DC to 1 GHz.

Based on the addresses determined by the 3-bit binary address lines A0, A1, and EN, the ADG904 and ADG904-R switch one of the four inputs to a common output RFC. When the EN pin is logic 1, the device is disabled.

Both feature on-chip CMOS control logic, eliminating the need for external control circuitry. The control inputs are compatible with both CMOS and LVTTL. The low power consumption of these devices makes them ideal for wireless applications and general frequency switching applications.

Product Focus

Shutdown isolation: −37 dB at 1 GHz
Insertion loss: 1.1 dB (1 GHz)
20-pin TSSOP/LFCSP package

apply

Wireless communication

Universal RF switch

Dual-band applications

High-speed filter selection

Digital transceiver front end switch

Intermediate frequency switch

Tuner module

Antenna diversity switch

andADG904BCPZRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
ADG904BRUZ-REEL7	ADI	15+	20 ld LFCSP	Wideband 2.5 GHz, 37 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, 4:1 multiplexer/SP4T
ADG904BRUZ-R	ADI	15+	20 ld LFCSP	Wideband 2.5 GHz, 37 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, 4:1 multiplexer/SP4T
ADG904BRUZ	ADI	15+	20 ld LFCSP	Wideband 2.5 GHz, 37 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, 4:1 multiplexer/SP4T
ADG904BCPZ-REEL7	ADI	15+	20 ld LFCSP	Wideband 2.5 GHz, 37 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, 4:1 multiplexer/SP4T
ADG904BCPZ-REEL	ADI	15+	20 ld LFCSP	Wideband 2.5 GHz, 37 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, 4:1 multiplexer/SP4T
ADG936BRUZ-REEL7	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BRUZ-R	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BRUZ	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BCPZ-RL7	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BCPZ-RL	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch

ADI brand product recommendations

Model	Manufacturers	lot number	encapsulation	illustrate
ADG936BRUZ-REEL7	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BRUZ-R	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BRUZ	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BCPZ-RL7	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
ADG936BCPZ-RL	ADI	15+	20 ld LFCSP	Wideband 4 GHz, 36 dB isolation (1 GHz), CMOS 1.65 V to 2.75 V, dual SPDT switches
HMC547LP3TR	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LP3ETR-AN	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LP3ETR	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LP3E-AN	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LP3E	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LP3	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LC3TR-R5	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LC3TR-AN	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LC3TR	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LC3-AN	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC547LC3	ADI	15+	16 ld QFN	GaAs MMIC, high isolation SPDT non-reflective switch in SMT package, DC to 28.0 GHz
HMC546MS8GETR	ADI	15+	6 ld DFN	HMC546LP2/HMC546MS8G 10 W to 20 W SPDT fail-safe switches in SMT packages from 0.2 GHz to 2.7 GHz
HMC546MS8GE	ADI	15+	6 ld DFN	HMC546LP2/HMC546MS8G 10 W to 20 W SPDT fail-safe switches in SMT packages from 0.2 GHz to 2.7 GHz
HMC546LP2ETR	ADI	15+	6 ld DFN	HMC546LP2/HMC546MS8G 10 W to 20 W SPDT fail-safe switches in SMT packages from 0.2 GHz to 2.7 GHz
HMC546LP2E	ADI	15+	6 ld DFN	HMC546LP2/HMC546MS8G 10 W to 20 W SPDT fail-safe switches in SMT packages from 0.2 GHz to 2.7 GHz