|
Model
project |
class |
Standard type |
L-shaped |
T-shape |
| NPN |
EE-SX770 EE-SX870
EE-SX770A EE-SX870A |
EE-SX771 EE-SX871
EE-SX771A EE-SX871A |
EE-SX772 EE-SX872
EE-SX772A EE-SX872A |
| PNP |
EE-SX770P EE-SX870P
EE-SX770R EE-SX870R |
EE-SX771P EE-SX871P
EE-SX771R EE-SX871R |
EE-SX772P EE-SX872P
EE-SX772R EE-SX872R |
| Detection distance |
5mm (groove width) |
| Standard detection distance |
Opaque 2×0.8mm or more |
| Differential distance |
0.025mm |
| Light source (maximum luminous wavelength) |
GaAs Infrared Light Emitting Secondary Tube (940nm) |
| Display light |
If the light is on (red) (type A and R type are illuminated when the light is blocked) |
| Supply voltage |
DC5~24V±10% pulsation (p-p) less than 10% |
| Current consumption |
35mA or less (NPN type), 30mA or less (PNP type) |
| Control output |
NPN type: NPN collector open circuit output DC5~24V 100mA or less
Residual voltage 0.8V or less (at load current 100mA), residual voltage 0.4V or less (at load current 40mA)
PNP type: PNP collector open-circuit output DC5~24V 50mA or less Residual voltage 1.3V or less (when the load current is 50mA) |
| Response Frequency * |
1kHz or more (average: 3kHz) |
| Use ambient illuminance |
Illuminance of the light surface fluorescent lamp is less than 1,000lx |
| Ambient temperature |
When operating: -25~+55°C When stored: -30~+80°C (non-freezing) |
| Ambient humidity |
During operation: 5~85%RH When stored: 5~95%RH (non-condensing) |
| Vibration (durable) |
20~2,000Hz (Max. acceleration 100m/s2)
Reamplitude 1.5mm in each direction of X, Y, and Z for 2h (4min cycle) |
| Impact (Durable) |
500m/s2 3 times in each direction of X, Y and Z |
| Protect the structure |
IEC specification IP60 |
| Connection |
Wire Lead Type (Standard Length 2m) |
| Quality (Bundle Status) |
Approx. 20g |
| Material |
enclosure |
Polybutylene terephthalate (PBT |