LMV951MK

• Product Introduction

peculiarity

(Typical 1.0V supply, unless otherwise noted) Guaranteed 1V single supply operation Wide frequency band There are no V OS glitches in the input CMVR I didn't have input bias current reversal beyond the V CM range Buffer output stage High output drive capability Output short

Current irrigation  

35 mA

Source current  

45 mA Rail-to-rail output buffering

@600Ω负载  

Both railways from 32 mV

@2kΩ load  

Both railways start at 12 millivolts

Temperature range  

-40°C to 125°C

illustrate

The LMV951 amplifier is powered from a single supply at 1V and 1.8V supply voltages, with guaranteed specifications from 0.9V to 3V.

The intrinsic most rail-to-rail input amplifier with no offset error and input bias current phase reversal extends the input common-mode range to two rails.

In contrast, the traditional rail-to-rail output amplifier LMV951 has a buffered output stage that provides an open-loop gain relative to the effect of the resistive output load. At a 1V supply voltage, the LMV951 is capable of exceeding 35 mA of source and sink and provides a gain bandwidth product of 2.7 MHz.

The LMV951 consumes less than 50 nA of supply current in shutdown mode.

apply

Battery-powered system Battery monitoring Supply current monitoring