AD9649-80 14-bit, 20/40/65/80 MSPS, 1.8 V analog-to-digital converter
The AD9649 is a monolithic, single, 14-bit, 20/40/65/80 MSPS analog-to-digital converter (ADC) that operates from a 1.8 V supply and contains high performance track-and-hold circuitry and an on-chip reference.
The multistage differential pipeline architecture with built-in output error correction logic provides 14-bit accuracy at 80 MSPS data rates and guarantees no missing codes over the entire operating temperature range.
The ADC includes features that provide optimal flexibility and minimal system cost, such as programmable clock and data alignment, and generation of programmable digital test patterns. Available digital test codes include built-in fixed and pseudo-random codes, as well as user-defined test codes input via the serial port interface (SPI).
A differential clock input with selectable divide-by-1, 2, or 4 divide-by-1 ratios controls all internal conversion cycles.
The digital output data is formatted as offset binary, gray code, or twos complement. A data output clock (DCO) is used to ensure that the receive logic has the correct latch timing. 1.8 V and 3.3 V CMOS levels are supported.
The AD9649 is available in a 32-lead LFCSP package, RoHS compliant, and is specified over the industrial temperature range of −40°C to +85°C.
apply
- correspondence
- Diversity radio system
- Multi-mode digital receiver
GSM、EDGE、W-CDMA、LTE、CDMA2000、WiMAX、TD-SCDMA
- Smart antenna system
- Battery-powered meter
- Handheld oscilloscope
- Portable medical imaging
- ultrasonic
- Radar/LIDAR
- Features and benefits
-
-
-
1.8 V analog supply operation
1.8 V to 3.3 V output supply
Signal-to-noise ratio (SNR):
74.3 dBFS (9.7 MHz input)
71.5 dBFS (200 MHz input)
Spurious-free dynamic range (SFDR):
93 dBc (9.7 MHz input)
80 dBc (200 MHz input)
Low power consumption:
45 mW (20 MSPS)
87 mW (80 MSPS)
- Differential input, 700 MHz bandwidth
On-chip reference and sample-and-hold circuitry
2 V peak-to-peak differential analog input
Differential nonlinearity (DNL): ±0.35 LSB
Serial port control options
Offset binary, gray code, or twos complement data format
For more features, please refer to the data sheet
Microchip Centennial Electronic Technology (Shenzhen) Co., Ltd
Address: Shenzhen Futian District Huaqiang Road Huaqiang Plaza A Block 13H
Tel: 0755-83591082
Fax: 0755-83591083
Q Q：1051085817
//www.chip100.com/