LM7341MF

• Product Introduction

 peculiarity (V S = ± 15V, T A = 25°C, typical). It is available in a 5-pin SOT-23 package to save space Greater than rail-to-rail input CMVR - 15.3V to 15.3V Rail-to-rail output swing - 14.84V to 14.86V Supply current 0.7 mA Gain bandwidth 4.6 MHz Swing rate 1.9 V/μs Wide power supply range 2.7V to 32V High power supply rejection ratio 106 dB High common-mode rejection ratio 115 dB Excellent gain 106 dB Temperature range -40°C to 125°C Tested at -40°C, 2.7V at 125°C and 25°C, ± 5V and ± 15V illustrate The LM7341 is a rail-to-rail input and output amplifier with a wide supply voltage and temperature range in a small SOT-23 package. The LM7341 has a 4.6 MHz gain bandwidth and a 1.9 volts per microsecond slew rate and a current supply of 0.75 mA at no load. LM7341 is tested at -40°C, 125°C and 25°C with modern automatic test equipment. The detailed performance specifications in 2.7V, ± 5V, ± 15V, and a wide temperature range make the LM7341 a great choice for automotive, industrial, and other demanding applications. The traverse-to-orbit input common-mode range ± 15V common-mode rejection minimum of 76 dB, making the LM7341 a good choice for both high-end and low-end remote sensing applications. The LM7341's performance is consistent over a wide voltage range, and the supply voltage can be changed in applications such as automotive electrical systems and battery-powered electronics, useful parts. The LM7341 uses a small SOT23-5 package that takes up very little board space and can be placed near the source to reduce noise pickup.   apply Car Industrial robots Sensor output buffer Multi-voltage power supply Reverse photodiode bias Low-current optocouplers High-side detection compare Battery charger Test point output buffer Below ground current detection