LMV654MT

• Product Introduction

 peculiarity (Typical 5V power supply, unless otherwise noted.) ）   Guaranteed 3.0V and 5.0V performance Low supply current LMV651 116μA LMV652 118μA per amplifier LMV654 122μA per amplifier High unity gain bandwidth 12 MHz Maximum input offset voltage 1.5 mV Common Mode Rejection Ratio (CMRR) 100 dB PSRR 95 dB Input reference voltage noise NV / 17 √ Hz Output swing of a 2kΩ load From the rail 120 mV Total harmonic distortion 0.003% @ 1 kHz, which is 2 kΩ Temperature range -40°C to 125°C illustrate The national LMV651/LMV652/LMV654 is a high-performance, low-power operational amplifier integrated circuit implemented with the national advanced VIP50 process. This part of the home functions while consuming only 116μA, which is a special bandwidth where op-amp power is more than 12 MHz bandwidth. The LMV651/LMV652/LMV654 are unity gain stable and provide an excellent solution for low-voltage universal amplification, low-power applications. This series of low-voltage, low-power amplifiers offer superior performance, in power and space usage and economical. These op amps have a maximum input offset voltage of 1.5 mV, rail-to-rail output stage, and input common-mode voltage range, which includes ground. The LMV651/LMV652/LMV654 provide a PSRR of 95 dB, a common mode rejection ratio (CMRR) of 100 dB, and a total harmonic distortion (THD) of 0.003% at 1 kHz frequency and a 2kΩ load. The operating power supply voltage range for this part of the home is from 2.7V and 5.5V. These op amps can operate over a wide temperature range (-40°C to 125°C), making them ideal for automotive applications, sensor applications, and portable device applications. The LMV651 is available in ultra-small 5-pin SC70 and 5-pin SOT-23 packages. The LMV652 is available in an 8-pin MSOP package. The LMV654 is available in a 14-pin TSSOP package.   apply Portable device Car Battery-powered system Sensors and Instruments