The HMC729LC3C is an integrated reset functionT trigger, designed to support clock frequencies up to 26 GHz. In normal operation, if the reset pin is not set, the output will switch from the previous state to another state on the positive edge of the clock. This achieves dividing the clock input. Regardless of the clock edge state, the asserting reset pin forces the Q output into a low state (asynchronous reset bit). Inverting the clock input supports negative edge triggering applications.
All signals entering the HMC729LC3C are terminated to on-chip ground at 50 Ω and can be either AC or DC coupled. The output can be connected directly to a 50 Ω terminated system, or DC blocking capacitors can be used if a 50 Ω terminated to a non-grounded DC voltage can be used. The HMC729LC3C operates from a single -3.3V DC supply and is available in a RoHS-compliant 3x3 mm SMT ceramic package.
apply
- Serial data transfer rates up to 26 Gbps
- High-speed divider (up to 26 GHz)
- Broadband test and measurement
- RF ATE applications