MAX4270

The MAX4265–MAX4270 ultra-low distortion, voltage-feed-back op amp can drive a 100Ω load while keeping ultra-low distortion over a wide bandwidth.They offer superior spurious-free dynamic range (dynamic range) performance: -90dBc at 5 MHz and 59dBc at 100 MHz (MAX4269).In addition, the input voltage noise density 8nV /And operate from single standard + 8.0v or dual ± 2.25v to ± 4.0v supplies.These features make the MAX4265–MAX4270 suitable for applications requiring low distortion and wideband in high-performance communications and signal processing applications.

The MAX4265 MAX4268 single-sumDual amplifiersGain is stable.The MAX4266 MAX4269 single and dual amplifiers compensate for a minimum stable gain of +2/five, while the MAX4267 MAX4270 single and dual amplifiers compensate for a minimum stable gain of +5/V.

Additional accumulated power for these amplifiers to functionLow power consumptionDisable mode supply current drops and places in output high impedance states.The MAX4265/MAX4266/MAX4267 are available in space-saving 8-pin μ maximum ® package, and the MAX4268/MAX4269/MAX4270 are available in 16 QSOP packages.

• Business + Standard + 8.0V
• Superior dynamic range 100Ω load
  • - 90dbc (female_{Type C} = 5 MHz)
  • - 59DBC (female_{Type C} = 100 MHz）
• 35dBm inositol (female_{Type C} Hertz) =
• 8nv /Voltage noise density
• What Flattens the Gain (MAX4268)
• 900V/μ conversion rate
• ± 45mA output drive capability
• Disable mode output in high impedance states

• Application/Purpose

  • Base station amplifiers
     
  • High-frequency drivers
     
  • High-frequency signal processing
     
  • Buffer high speed digital-to-analog converter
     
  • If the amplifier
     
  • RF telecommunications applications