LM5037QMTX

• High voltage (100V) starter
• Topology with alternating two-ended outputs
• Current-mode or feed-forward voltage-mode control
• Programmable maximum duty cycle lLimit
• 2% feedback reference accuracy
• High gain bandwidth error amplifier
• Programmable line undervoltage lockout (UVLO) adjustable hysteresis
• Hiccup delay timer for versatile dual-mode overcurrent protection
• Programmable soft-start
• Precision 5V reference output
• Current sensing leading edge blanking
• Resistor programmed 2 MHz oscillator
• Synchronization capability with low-frequency oscillation latch-off protection

illustrate

The LM5037 PWM controller contains all functions such as push-pull, half-bridge and full-bridge to implement a balanced two-ended power converter topology. These two-ended topologies allow for higher efficiency and greater power density than common single-ended flyback topologies and are forward-looking. The LM5037 can be configured for voltage- or current-mode external component control with minimal external components. Two alternating gate drive outputs are provided with peak output current per 1.2A. The LM5037 can be configured directly from a wide range input voltage rail above 13V to 100V. Other features include programmable maximum duty cycle limit, line undervoltage lockout, cycle-by-cycle current limit, hiccup mode, adjustable timeout delay, soft-start, and 2 MHz synchronization for accurate reference and thermal vibration fail-safe shutdown.