peculiarity
超低压差
保证150 mA的输出电流
最小尺寸(SOT - 23,micro SMD封装)
需要最少的外部元件
稳定低ESR输出电容器
在所有负载低接地引脚的电流
输出电压精度1%(A级)
高的峰值电流能力
宽电源电压范围(16V最大)
低Z OUT:0.3Ω典型(10 Hz至1 MHz)
过热/过流保护
-40 ° C至+125 ° C的结温范围
自定义的电压可用
illustrate
The LP2985 is a 150 mA, fixed output voltage regulator that offers ultra-low dropout and a low-noise design for battery-powered applications.
Using an optimized VIP (Vertically Integrated PNP) process, the LP2985 delivers unmatched performance in a wide range of battery powered designs key to a wide range of specifications:
Differential voltage: typically a load of 300 mV @ 150 mA and a load of 7 mV @ 1 mA.
Ground Pin Current: Typically 850 μ A@ 150 mA load, and 75 μ A@ 1 mA load.
Enhanced stability: The LP2985 has an ESR of as low as 5MΩ with the output capacitor, which makes the output stable using ceramic capacitors.
Sleep Mode: The ON/OFF pin with quiescent current below 1μA is pulled down.
Smallest possible size: SOT-23 and micro SMD packages use the absolute minimum board space.
Precision Output: 1% accurate output voltage (Class A).
Low noise: Output noise can be reduced by 30μV (typical) by adding a bypass capacitor of 10 nF.
A wide range of voltage options, from 2.5V to 5.0V, are available as standard. Custom voltage consulting factory.
apply
Cellular phones
Laptop/laptop
Personal Digital Assistant (PDA)
Camcorder, walkman, camera