- FlexCap: Stable with ceramic, tantalum capacitors or aluminum
- Stable with 10μF input/output capacitance
- Adjustable output voltage from 0.6V to 5V
- Low ground pin current
- 25 nA quiescent current shutdown mode
- The guaranteed output current is 3A
- Available in TO-263, TO-263 low profile packages
- Guarantee VADJAccuracy of ± 1.5% @ 25°C (Class A)
- Guarantee VADJ精度为± 3.5%@ 25 ° C(STD)
- Overtemperature and overcurrent protection
- -40°C to +125°C operating rangeTJ
- Enable Pin (LP38501)
illustrate
National Semiconductor's FlexCap LDO features unique compensation, allowing any type of output capacitor with no limit on the use of minimum or maximum ESR. 而低压差线性稳压器LP38501 / 3系列工作于+2.7 V至+5.5 V输入电源。 These ultra-low dropout linear regulators respond very quickly to intervene in the load, which makes them suitable for changes in low voltage microprocessor applications. 在CMOS工艺开发(利用一个PMOS晶体管)时,LP38501 / 3具有低静态电流与负载电流的变化不大。
Ground pin current: 通常2毫安在3A的负载电流。
Disable mode: The enable pin is typically pulled low at 25 nA quiescent current.
Simplified compensation: As with any type of output capacitor, ESR is both stable.
Precision output: "A" with 1.5% VADJTolerance (25 ° C) and above line, load and temperature grade versions are available 3%.
apply
- Printer, drawing card, DVD player
- Set-top boxes, copiers, routers
- DSP and FPGA power supplies
- Switching power supply regulators
- Convert from 3.3V or 5V rails
|