LMV751M5
Product images are for illustrative purposes only
Product details are welcome upon request

LMV751M5

  • Category:Comparator
  • Product Name:3 Gbps HD/SD SDI extended coverage and configurable adaptive cable equalizer
  • Manufacturers:NSC
  • Production Batch Number:10+
  • Encapsulation:SOT23-5
  • Stock Status:There is stock
  • Stock Quantity:3000
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the LMV751M5
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

peculiarity

  • SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M standards
  • Supports DVB - ASI at 270 Mbps
  • Wide range of data transfer rates: 125 Mbps to 2.97 Gbps
  • Equalize the Belden 1694A up to 140 meters at 2.97 Gbps, up to 1.485 Gbps on the 200-meter Belden 1694A, and up to 400 meters Belden 1694A at 270 Mbps
  • Automatic sleep power saving control (typical power consumption for 35 mW power saving mode) mode
  • Optional SPI register access
  • Manual bypass and output mute with programmable thresholds
  • The internal 100ΩLVDS output terminates common-mode voltage and swing with SPI programmable output
  • Programmable emission amplitude optimization in SPI mode
  • Cable length specification in SPI mode
  • Operates from a single 3.3V supply
  • 16-pin LLP package
  • Industrial temperature range: -40 °C to +85 °C
  • The footprint is pin-compatible with LMH0344, LMH0044, and LMH0074.

illustrate

The LMH0384 3 Gbps HD/SD SDI Extended Coverage and configurable Adaptive Cable EQ is designed to balance data transmitted over the cable (or any media with similar dispersion loss characteristics). The equalizer operates at a wide range of data rates from 125 Mbps to 2.97 Gbps and supports the SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M standards.

The LMH0384 includes active sensing features including longer cable equalization, lower output jitter, configurable pin mode and SPI mode, power-saving sleep mode, programmable output common-mode voltage and swing and design improvements. LMH0384 realizes DC recovery to the conditions for correct processing of pathological data.

The LMH0384 includes a device mode for detecting no input signal during sleep with automatic power reduction. Other features include independent carrier detection and output, the output can be connected together to mute the pin when there is no input signal, and a programmable mute reference to mute the output at a selectable degree of signal attenuation.

The LMH0384 supports two modes of operation. In-pin mode (non-SPI mode) LMH0384 is compatible with LMH0344 footprint and legacy SDI equalizer. In selectable SPI mode, the LMH0384 provides register access as well as cable length indication, programmable output common-mode voltage and swing to all its functions, and initiates amplitude optimization.

The device is available in a 16-pin LLP package.


apply

  • SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M serial digital interfaces
  • Serial digital data and receive equalization
  • Data restoration balancing

andLMV751M5Related ICs are:


Model Manufacturers lot number encapsulation illustrate
AT91SAM7S256-AU-001 ATMEL 1010+ LQFP-64 LQFP,GREEN,IND TEMP(ARM)
AT25256B-SSHL-T ATMEL 10+ SOP 256K SPI Serial EEPROMs
LMV771MGX NSC 10+ SC70-5 Single/dual/quad, low offset, low noise, RRO op amp
LMV771MG NSC 11+ SC70-5 Single/dual/quad, low offset, low noise, RRO op amp
LMV762MM NSC 09+ MSOP8 Low voltage, with push-pull output accuracy comparator
LMV7272TL NSC 10+ QFN Dual 1.8V rail-to-rail input low-power comparators
LMV7271MGX NSC 09+ SC70-5 Single 1.8V rail-to-rail input low power comparator
LMV7271MF NSC 11+ SOT23-5 Single 1.8V rail-to-rail input low power comparator
LMV7239M7X NSC 10+ SC70-5 Output input comparator
LMV7239M5X NSC 11+ SOP Output input comparator

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

NSC brand product recommendation


Model Manufacturers lot number encapsulation illustrate
LMV7272TL NSC 10+ QFN Dual 1.8V rail-to-rail input low-power comparators
LMV7271MGX NSC 09+ SC70-5 Single 1.8V rail-to-rail input low power comparator
LMV7271MF NSC 11+ SOT23-5 Single 1.8V rail-to-rail input low power comparator
LMV7239M7X NSC 10+ SC70-5 Output input comparator
LMV7239M5X NSC 11+ SOP Output input comparator
LMV722MM NSC 10+ SOT-353 Output comparator
LMV7219M7 NSC 11+ SC70-5 Output comparator
LMV7219M5 NSC 10+ SOT23-5 7 nanosecond, 2.7V to 5V rail-to-rail PowerWise ® series slave output comparators
LMV712TL NSC 10+ MICRO SMD Low power, low noise, high output, the RRIO dual op amp has independent shutdown
LMV712MMX NSC 09+ MSOP8 Low power, low noise, high output, the RRIO dual op amp has independent shutdown
LMV712MM NSC 07+ MSOP-10 Low power, low noise, high output, the RRIO dual op amp has independent shutdown
LMV712LD NSC 09+ LLP-10 Low power, low noise, high output, the RRIO dual op amp has independent shutdown
LMV711M6 NSC 10+ SOT23-6 Low power, high output current drive and shutdown option RRIO op amp
LMV710M5 NSC 10+ SOT23-5 Low power, high output current drive and shutdown option RRIO op amp
LMV652MM NSC 10+ MSOP-8 12 MHz, low voltage, from the low power PowerWise ® series amplifiers
LMV641MG NSC 10+ sop8 10 MHz, 12V, low power amplifier from the semiconductor PowerWise ® series
LMV431CZ NSC 09+ TO92-3 Low voltage (1.24V) adjustable precision shunt regulator
LMV393MM NSC 11+ SOP8 Low power dual operational amplifiers
LMV358MMX NSC 09+ MSOP8 Low power dual operational amplifiers
LMV344MAX NSC 10+ SOP14 3 Gbps HD/SD SDI adaptive cable equalizer

Categorical search