LTC1435CS
Low noise for high efficiency synchronous step-down switching regulators
peculiarity
- Dual N-channel MOSFET synchronous drive
- Programmable fixed frequency
- Wide VINRange: 3.5V to 36Voperate
- Ultra-high efficiency
- Very low dropout operation: 99% duty cycle
- Low standby current
- Secondary feedback control
- Programmable soft-start
- Remote output voltage sensing
- Logic-controlled micropower shutdown：IQ
- Foldback current limit (optional)
- Current mode operation with excellent line and load transient response
- Output voltages range from 1.19V to 9V
- Available in 16-pin narrow SO and SSOP packages
description
The LTC ® 1435 is a synchronous step-down switching regulator controller driving external N-channel power MOSFETs using a fixed frequency architecture. Burst Mode ™ operation provides high efficiency at low load currents. A 99% maximum duty cycle limit provides low-dropout operation and extends the runtime of battery-powered systems.
The operating frequency is allowed by an external capacitor for maximum flexibility, thus optimizing efficiency. The secondary coil feedback control pin, SFB, guarantees forced continuous operation, regulating the load on the primary output, regardless of the load. Disable Burst Mode operation when the SFB pins are pulled low, reducing noise and RF interference.
Soft start is supplied by an external capacitor that can be used for the correct sequence. With an external current sense resistor, the operating current level is user-programmable. Wide input voltage range from 3.5V to 30V (36V maximum).
For minimum guaranteed and tested times, refer to the "A" version of the LTC1435Aof the LTC1435. The minimum guarantee of time for the LTC1435A is。 The only difference between these two parts, which is the guaranteed minimum time。 The price is the same.