home page>Product Center> DSL/Power Line
THS3092
Product images are for illustrative purposes only
Product details are welcome upon request

THS3092

  • Category:DSL/Power Line
  • Product Name:Dual high voltage low distortion current feedback operational amplifiers
  • Manufacturers:TI
  • Production Batch Number:09+10+
  • Encapsulation:8SO PowerPAD, 8SOIC
  • Stock Status:There is stock
  • Stock Quantity:5000
  • Minimum order quantity: 1
  • Details:Click here to find a pdf of THS3092
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

The THS3092 and THS3096 are dual high voltage, low distortion, high speed, designed to operate in applications requiring large, pin, power linear output signals for ± 5 V wide supply voltage range of ± 15 V current feedback amplifier FETs, and VDSL line drivers.

The THS3096 has a power-down pin(PD)In standby mode, this allows the amplifier to be low power and reduces the quiescent current from microamps to 500 by 9.5 mA.

The wide voltage range, total harmonic distortion of -66 dBc and low up to 10 MHz, in addition, combined with a high slew rate to 5700 V/μs, make the THS3092/6 ideal for high voltage arbitrary waveform driver applications. In addition, the ability to handle large volumes of drive voltage fluctuations into high impedance, high capacitive loads while maintaining good settling time performance makes the THS3092/6 pin driver ideal for driver applications and PowerFETs.

characteristic
  • Low distortion
    • 66 dBc HD at 10 MHz, studiedL for100
    • 10 MHz of HD3 at 76 dBc, studiedL for100
  • Low noise
    • 13 nylon/ hertzNoninverting current noise
    • 13 nylon/ hertzInverting current noise
    • 2Nevada/ HzVoltage noise
  • High slew rate: 5700 V/μs (g = 5.)forV O = 20Vpeak-to-peak)
  • Wide bandwidth: 160 MHz (g = 5, researchL for100
  • High output current drive: ± 250 mA
  • Wide supply voltage range: ± 5 V to ± 15 V
  • Power saving features: (THS3096 pcs)
  • apply
    • High voltage arbitrary waveform
    • Power FET driver
    • Pin driver
    • Line drivers for VDSL
parameter
  THS3092  
IQ per channel (max.) (mA) 11  
Slew rate (typical) (V/US) 5700  
Ganymede (typical) (mAh) 250  
and (min) (v) 10  
and (maximum) (v) 30  
Number of channels 2  
Pins/Packets 8SO will be PowerPAD, 8SOIC  
ACL, the minimum stable gain (V/V). One  
ACL (MHz) of weight @ 160  
Differential Gain(%) 0.013  
Phase error (degrees) 0.02  
Violet (maximum) (millivolts) 4  
Total harmonic distortion (CFC = 1 MHz) (typical) (dB) -83  
Settling time (0.1%) (typical) (nanoseconds) 72  
Maximum offset voltage drift (+/-)((UV/Celsius) 10  
Available channels ð  
(typical) in the flat band Vn (Nevada/rtHz) 2  
About. Price (USD) 4.90 | per thousand  
Explosion protection (max.) (North America) 20000  
Noninverting Input Current Noise (Yearly/rtHz) 13  
Second harmonic (DBC). 66  
Third harmonic (DBC). 76  
@兆赫 10  
Weight @ g = 2 (MHz) 145  
0.1 dB bandwidth flatness (MHz) 50  
Inverting Input Current Noise (Yearly/rtHz) 13  
Crosstalk (-dB). 60  
Operating temperature range(°C) -40 to 85  

andTHS3092Related ICs are:


Model Manufacturers lot number encapsulation illustrate
V23092-A1024-A301 SCHRACK 11+ DIP Relays
V3-3092-D9 LITTELFUSE 11+ DIP connector
MC33092 Motorola 01+ SMD Brand new original
A3092N SONY N/A SOP Brand new original
L3092N ST 05+ DIP-28 Brand new original
MC33092ADW Motorola 98+ SOP brand new
THS3092 TI 09+10+ 8SO PowerPAD, 8SOIC Dual high voltage low distortion current feedback operational amplifiers

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
THS3091 TI 09+ 8SO PowerPAD, 8SOIC Single high voltage, low distortion current feedback operational amplifier
THS3062 TI 09+ 8MSOP-PowerPAD, 8SO PowerPAD, 8SOIC High voltage, high slew rate current feedback amplifier
THS3061 TI 09+ 8MSOP-PowerPAD, 8SOIC High voltage, high slew rate current feedback amplifier
THS3001 TI 10+ 8MSOP-PowerPAD, 8SOIC 420MHz current feedback amplifier
OPA695 TI 09+ 6SOT-23, 8MSOP, 8SOIC Ultra-wideband current feedback op amp with disable function
OPA694 TI 10+ 5SOT-23, 8SOIC Wideband, low power, current feedback amplifier
OPA691 TI 07+ 6SOT-23, 8SOIC Wideband current feedback op amp with disable function
OPA684 TI 07+ 6SOT-23, 8SOIC Low power current feedback op amp with disable function
OPA683 TI 11+ 6SOT-23, 8SOIC Very low power current feedback amplifier with disable function
OPA4684M TI 10+ 14CDIP SB Military quad low-power current feedback operational amplifiers
OPA4684 TI 09+ 14SOIC, 14TSSOP Four low-power current feedback op amps
OPA3695 TI 10+ 16SSOP/QSOP Ultra-wideband current feedback op amp with disable function
OPA3691 TI 10+ 16SOIC, 16SSOP/QSOP Three wideband current feedback op amps with disable function
OPA3684 TI 09+ 14SOIC, 16SSOP/QSOP Low power triple current feedback op amp with disable function
OPA2695 TI 10+ 16QFN, 8SOIC16QFN, 8SOIC Ultra-wideband current feedback op amp with disable function
OPA2694 TI 08+ 8SOIC Two, wideband, low-power current feedback op amps
TPS61072 TI 1016+ SOT23-6 The adjustable, 600 mA switch, 90% efficiency PFM/PWM is used in a ThinSOT-23 boost converter
OPA2691 TI 07+ 14SOIC, 8SOIC Dual wideband current feedback op amps with disable function
OPA2683 TI 09+ 10MSOP, 8SOIC, 8SOT-23 Very low power dual current feedback op amps
TPS61071 TI 10+ SOT23-6 Adjustable 600mA switching 90% efficiency PWM boost converter

Categorical search