The HMC727 is oneD-type trigger, designed to support data transfer rates up to 13 Gbps and clock frequencies up to 13 GHz. In normal operation, data is transferred to the output at the positive edge of the clock. Inverting the clock input supports negative edge triggering applications. All signals input to the HMC727 are terminated to on-chip ground through a 50 Ω resistor and are AC- or DC-coupled.
The differential outputs of the HMC727 can be either AC or DC coupled. The output can be connected directly to a 50 Ω ground-terminated system, while DC blocking capacitors can be used if 50 Ω terminated to an ungrounded DC voltage. The HMC727 operates from a single -3.3V DC supply and is available in a RoHS-compliant 3x3 mm SMT ceramic package.
apply
- RF ATE applications
- Broadband test and measurement
- Serial data transfer rates up to 13 Gbps
- Up to 13 GHzDigital logicsystem