peculiarity
In VS= 5V, unless particularly typical.
|
Greater than rail-to-rail input CMVR
|
- 0.25V to 5.25V
|
|
Rail-to-rail output swing
|
0.01V to 4.99V
|
|
Wide gain bandwidth
|
75 MHz @ 100 kHz
|
-
Slew rate
|
Small signal
|
5 V/μs
|
|
Big signal
|
45 V/μs
|
|
Low supply current
|
1.4 mA/amplifier
|
|
Wide power supply range
|
2.7V to 24V
|
- Fast settling time of 1.1 μs 2V step (0.01%)
- PSRR 91 dB
- CMRR 84 dB
illustrate
Using a patented circuit topology, the LM6152/LM6154 provide a new level of performance with speed and force applications where low voltage power supplies or power limits previously made the compromises necessary. With a supply current of only 1.4 mA/amplifier and a gain bandwidth of 75 MHz, the device supports unacceptable lost battery life for higher power devices in new portable applications. The slew rate of the device increases and the input differential voltage increases, allowing the device to handle capacitive loads while maintaining the amplitude of the large signal.
The LM6152/LM6154 can drive voltages over two rails, eliminating concerns about exceeding the common-mode voltage range. Rail-to-rail output swing capability provides the maximum possible output dynamic range. This is especially important when operating at low supply voltages.
Operating from 2.7V to over 24V supplies, the LM6152/LM6154 is excellent for a wide range of applications, from large bandwidth requirements to high-speed instrumentation battery-powered systems.
apply
- Portable high-speed instrumentation
- Signal conditioning amplifier/ADC buffer
- Barcode scanner
|