LTC1069-7CS8

• Product Introduction

LTC1069-7CS8  8th order low-pass filter

The cut-off frequency of LTC1069 - 7 is set externally Clock and clock frequency divided by 25 equals. Internal sampling frequency ratio cutoff The frequency is 50:1, which is the input signal for sampling Twice as many cycles per clock cycle to reduce the risk of sample misalignment. “ LTC1069-7 operates from a single 5V supply and can operate up to Dual ± 5V power supply. LTC1069-7 gain and phase response can Used for local pulses in digital communication systems Shaping and channel bandwidth limits must be carried out Come out. Any system needs an analog filter with linearity phase and clearer roll than traditional Bézier filters LTC1069 - 7 can be used. LTC1069-7 has a wide dynamic range. Use ± 5V supplies and a 0.1V input range RMS Up to 2V RMS middle The ratio of signal (noise + THD) ≥ 60 dB. Broadband noise LTC1069-7 is 140μV RMS Unlike other LTC1069 - X filters, Typical passband gain LTC1069 – 7 – 1V/V. LTC1069-7 is available in SO-8 package