LM26CIM5-TPA

• The internal comparator pin is programmable for 2°C or 10°C hysteresis
• No external components are required
• Open-drain or push-pull digital output; CMOS logic levels are supported
• Output temperature sensor inside_temperaturewith V pin
• V_temperatureThe output allows post-assembly system testing
• Internal voltage reference and setting of the DAC's trip point
• Currently, the 5-pin SOT-23 plastic package
• Excellent power supply noise rejection
• UL approved components

illustrate

The LM26 is a high-precision single digital output, low-power thermostat consisting of an internal reference, digital-to-analog converter, temperature sensor and comparison. Using factory programming, it can manufacture different trigger points as well as different digital output functions. This visit point (t_OS）Any plant can be preset in the -55°C temperature range, in increments of 1°C to +110°C. The LM26 has a digital output (OS/^OS/US/^US), 1 digital input (HYST) and an analog output (V_temperature）。 The digital output stage can be preset to either open drain or push-pull. In addition, it can be programmed as a high or low plant. The digital outputs can be programmed to represent plants that turn off events over temperature (OS or ^OS) or shutdown events based on temperature (US or ^US). When preset to thermal shutdown (^OS) it will become low, indicating the mold temperature_{operating system}Is preset T inside and goes to high temperature, high below (tons_{operating system}- T's_HYST）。 Similarly, when shutting down pre-programmed as undertemperature (US) will not become high, indicate_{United States}When the temperature is lower than T and becomes lower, the temperature is higher than (tons_{United States}+ T_HYST）。 Typical hysteresis, T_HYST，It can be set to 2°C or 10°C and pin-controlled HYST status too. Video_temperatureA temperature proportional to the analog output voltage and a -10.82mV/°C output slope are provided.

Detailed ordering information is available in the parts. As for the options in the other sections, learn about minimum order eligibility by country semiconductor distributor or sales representative. The LM26 is currently available in a 5-pin SOT-23 package.

Focus on specifications