peculiarity
(Typical for 3V power supply, unless otherwise noted)
|
Wide supply voltage range
|
2.7V to 12V
|
|
Swing rate
|
7.7 V / MS |
|
Supply current
|
880 nA
|
|
Output short-circuit current
|
1.35 mA
|
|
Rail-to-rail input
|
|
|
Rail-to-rail output
|
100 mV orbit
|
|
Bandwidth (C L = 50 pF, R L = 1 MΩ)
|
27 kHz
|
|
Unit gain is stable
|
illustrate
The LPV511 micropower op-amp is a guaranteed specification that operates from the supply voltage range as wide as 2.7V with 3V, 5V and 12V to 12V. The LPV511 has an excellent speed-to-power ratio, and the Draw 880 only supplies 27 kHz of bandwidth at the current NA. These specifications make the LPV511 ideal for battery-powered systems, which require low supply current, long life, such as instrumentation, sensor regulation, and battery current monitoring.
The LPV511 has an input range that includes two power rails on the ground and high battery detection applications. The LPV511 has an output swing of either rail at 100 mV, maximizing the dynamic range of the signal in low-power applications. In addition, the output is the ability to be powered by a 12V battery when purchasing 650 microamps.
The LPV511 is fabricated about the advanced VIP50C process of the US National Semiconductor.
The LPV511 is available in an energy-efficient SC70 package, making it ideal for portable electronics with limited PC board area.
apply
- Battery-powered system
- Security system
- Microthermostat
- Solar powered system
- Portable instrument
- Microfilter
- Remote sensor amplifier
|