- LVDS signal
- 3.3V or 5.0V operation
- Low-power CMOS design
- Balance the output impedance
- Glitch free power, up/down (driver disabled)
- High signal rate capacity (over 100 Mbps).
- Ultra-low power consumption
- ± 1V common-mode range
- ± 100 mV reception sensitivity
- SOIC and TSSOP packages are also available
- Flow-through pin output
- Operates over an industrial-grade temperature range
illustrate
The DS90LV019 is a dedicated driver for the /receiver designed for high-speed, low-power point-to-point interconnect applications. The device operates from a single 3.3V or 5.0V supply, with a differential line driver and a receiver. The DS90LV019 has a separate driver and receiver CMOS compatible with TTL/(D).outputand R). The logical interface provides maximum flexibility, providing 4 separate lines (Doutput, de, rare earth # and R). The device also features a stream through the pin output, allowing simple connector pins and short stub routing between PCBs. The driver has an output loop current of 3.5 mA.
Driver with TTL level (single-ended) to low voltage differential signal conversion level. This allows high-speed operation while consuming minimal power to reduce EMI. In addition, differential signals provide common-mode noise rejection.
The receiver threshold is ± 100 in the common-mode range of ± 1V and the level of the low swing differential level standard (TTL/CMOS electric) for converting mV.
|